SCP003 - SILVER CONDUCTIVE PAINT
| Group: | Home : All Items : Chemicals > Miscellaneous > |
|---|---|
Technical Data Sheet PRODUCT DESCRIPTION: Silver Conductive Paint DATE: 03/97 PRODUCT CODE: SCP PAGES: 1 PRODUCT DESCRIPTION Silver Conductive Paint, SCP, provides a thin, smooth, adherent, flexible film of high electrical conductivity on a wide range of substrates, including plastics, paper, wood, textiles, glass, ceramics and metals. It can be applied by brushing, spraying, dipping, or a pencil and will dry at room temperature. PRODUCT USE PCB design and repair, repairing heated rear window-screens, mark sensing e.g. on recording tapes, screening plastic housings against high frequency fields, earthing strips, leading off primary electrons in scanning microscopy, connections to non-solderable surfaces, electroplating pre-coats, contact surfaces, potentiometer tracks, etc. FEATURES * Thin film only required, making SCP economic in use. * Good electrical conductivity and low surface resistivity. * Excellent adhesion to wide range of materials. * Cures at room temperature. APPLICATION Shake or stir the product thoroughly before use. Ensure surface to be coated is clean, dry and free from oil, grease or dirt. Replace cap securely after use to avoid evaporation of the solvents. Use Electrolube Clear Protective Lacquer after application to prevent oxidation or formation of silver compounds and to prevent mechanical damage. SCP can be baked at 150°C if greater adhesion is required. TYPICAL PROPERTIES Dispersed Solid: Grey Liquid Carrier: Solvent Blend Consistency: Creamy Specific Gravity @ 20°C: 1.71 Surface Resistance @ 0.6 to 2 g/100cm 2 0.01 to 0.03 Ohms/sq Electrical Rating: 0.1 to 1 W/cm 2 Drying time @ 20°C: 10 minutes Temperature Range: -80°C to +125°C Flash Point: -18°C PACKAGING PRODUCT CODE 3 Gram Bottle SCP03B | |
| Quantity in stock: | 0 |
| Stock Unit: | ea |
| Price: | NZ$42.13 (+ 15.0% GST) |
15.0% Goods and Services tax will be added to your order.
  |  |
